MyHealth@EU Laboratory Report
9.2.0 - trial-use 150

MyHealth@EU Laboratory Report - Local Development build (v9.2.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: ObservationResultsLaboratoryMyHealthEu - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 2

Definitions for the Observation-resultslab-lab-myhealtheu resource profile.

See the documentation on how to interpret the contents of this table

0. Observation
Definition

This observation may represent the result of a simple laboratory test such as hematocrit or it may group the set of results produced by a multi-test study or panel such as a complete blood count, a dynamic function test, a urine specimen study. In the latter case, the observation carries the overall conclusion of the study and references the atomic results of the study as "has-member" child observations


Measurements and simple assertions made about a patient, device or other subject.

ShortLaboratory result for a simple test or for a panel/studyMeasurements and simple assertions
Comments

Represents either a lab simple observation or the group of observations produced by a laboratory study.


Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

Control0..*
Is Modifierfalse
Impose ProfileThis profile also requires that the instance also conform this additional profile:
Summaryfalse
Alternate NamesVital Signs, Measurement, Results, Tests
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
obs-value-1: The elements Observation.extension:value-r5 and Observation.value[x] SHALL not be used simultaneously. (value.empty() or extension('http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.value').empty())
eu-lab-1: If observation status is other then "registered" or "cancelled", at least one of these Observation elements shall be provided with an actual value: "value", the R5 "value[x]" extension, "dataAbsentReason", "hasMember" or "component" ((status in ('registered'|'cancelled')) or value.hasValue() or value.children().exclude(value.extension).exists() or extension.where(url='http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.value').value.exists() or hasMember.exists() or component.exists() or dataAbsentReason.exists())
eu-lab-2: If observation status is other then "registered" or "cancelled", every Observation.component shall provide one of these elements with an actual value: "value", the R5 "component.value[x]" extension or "dataAbsentReason" ((status in ('registered'|'cancelled')) or component.all(value.hasValue() or value.children().exclude(value.extension).exists() or extension.where(url='http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.component.value').value.exists() or dataAbsentReason.exists()))
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
2. Observation.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Observation.language
Definition

The base language in which the resource is written.

ShortLanguage of the observationLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from The codes SHOULD be taken from eHDSI Languagehttp://hl7.org/fhir/ValueSet/languages|4.0.1
(required to http://terminology.ehdsi.eu/ValueSet/eHDSILanguage)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Observation.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Observation.extension:bodyStructure
Slice NamebodyStructure
Definition

R5: Observation.bodyStructure (new:Reference(BodyStructure))

ShortR5: Observed body structure (new)
Comments

Element Observation.bodyStructure has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.bodyStructure has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Only used if not implicit in code found in Observation.code or bodySite is used. In many systems, this may be represented as a related observation instead of an inline component.

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: Observed body structure (new)) (Extension Type: Reference(Cross-version Profile for R5.BodyStructure for use in FHIR R4, BodyStructure))
Is Modifierfalse
Summaryfalse
Requirements

EHDSObservation.anatomicLocation

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Observation.extension:triggeredBy
Slice NametriggeredBy
Definition

R5: Observation.triggeredBy (new:BackboneElement)

ShortR5: Triggering observation(s) (new)
Comments

Element Observation.triggeredBy has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Triggering observation(s) (new)) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Observation.extension:triggeredBy.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control20..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
14. Observation.extension:triggeredBy.extension:observation
Slice Nameobservation
Definition

An Extension

ShortExtensionAdditional content defined by implementations
Control10..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Observation.extension:triggeredBy.extension:observation.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
18. Observation.extension:triggeredBy.extension:observation.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "observation"
}
<url value="observation"/>
20. Observation.extension:triggeredBy.extension:observation.value[x]
Definition

Reference to the triggering observation.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortTriggering observationValue of extension
Control10..1
TypeReference(Observation: Medical Test Result (MyHealth@EU Core)), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

EHDSObservation.triggeredBy[x]

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Observation.extension:triggeredBy.extension:type
Slice Nametype
Definition

R5: Observation.triggeredBy.type (new:code)

ShortR5: reflex | repeat | re-run (new)Additional content defined by implementations
Comments

Element Observation.triggeredBy.type is part of an existing definition because parent element Observation.triggeredBy requires a cross-version extension. Element Observation.triggeredBy.type has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy.type has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control10..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element Observation.triggeredBy.type is part of an existing definition because parent element Observation.triggeredBy requires a cross-version extension. Element Observation.triggeredBy.type has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy.type has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Observation.extension:triggeredBy.extension:type.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "type"
}
<url value="type"/>
26. Observation.extension:triggeredBy.extension:type.value[x]
Definition

The type of trigger. Reflex | Repeat | Re-run.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Shortreflex | repeat | re-runValue of extension
Control10..1
BindingThe codes SHALL be taken from For codes, see R5ObservationTriggeredbytypeForR4 (0.1.0)
(required to http://hl7.org/fhir/uv/xver/ValueSet/R5-observation-triggeredbytype-for-R4|0.1.0)

The type of TriggeredBy Observation.

Typecode, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Observation.extension:triggeredBy.extension:reason
Slice Namereason
Definition

R5: Observation.triggeredBy.reason (new:string)

ShortR5: Reason that the observation was triggered (new)Additional content defined by implementations
Comments

Element Observation.triggeredBy.reason is part of an existing definition because parent element Observation.triggeredBy requires a cross-version extension. Element Observation.triggeredBy.reason has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy.reason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element Observation.triggeredBy.reason is part of an existing definition because parent element Observation.triggeredBy requires a cross-version extension. Element Observation.triggeredBy.reason has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy.reason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Observation.extension:triggeredBy.extension:reason.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "reason"
}
<url value="reason"/>
32. Observation.extension:triggeredBy.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.triggeredBy"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.triggeredBy"/>
34. Observation.extension:triggeredBy.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..01
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Observation.extension:value-r5
Slice Namevalue-r5
Definition

When the result is a Diagram or Picture (Microbiology), then the Attachment data type should be used. In FHIR R4 this can be done by preadopting the R5 Observation.value[x] element using the cross-version extension.

Shortonly for Diagrams or Pictures
Comments

Element Observation.value[x] is mapped to FHIR R4 element Observation.value[x] as SourceIsBroaderThanTarget. The mappings for Observation.value[x] do not cover the following types: Attachment, Reference. The target context Observation.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Observation.

  • An observation may have:
    1. a single value here
    2. both a value and a set of related or component values
    3. only a set of related or component values.
  • If a value is present, the datatype for this element should be determined by the code.
  • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
  • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
  • The usage of valueReference is restricted to the MolecularSequence resource when used as a definitional resource, not as a patient-specific finding. .
  • For additional guidance, see the Notes section below.
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: value additional types) (Extension Type: Choice of: Attachment, Reference(Cross-version Profile for R5.MolecularSequence for use in FHIR R4, MolecularSequence))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Observation.extension:value-r5.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
40. Observation.extension:value-r5.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.value"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.value"/>
42. Observation.extension:supportingInfo
Slice NamesupportingInfo
Definition

Other resources from the patient record that may be relevant to the event. The information from these resources was either used to create the instance or is provided to help with its interpretation. This extension should not be used if more specific inline elements or extensions are available. For example, use Observation.hasMember instead of supportingInformation for representing the members of an Observation panel.

ShortOther information that may be relevant to this event.
Control0..*
TypeExtension(Supporting info) (Extension Type: Reference(Resource))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
44. Observation.extension:labTestKit
Slice NamelabTestKit
Definition

The laboratory test kit used for this test.

ShortLaboratory Test Kit
Control0..*
TypeExtension(Device Laboratory Test Kit) (Extension Type: Reference(Device))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Observation.extension:certifiedRefMaterialCodeable
Slice NamecertifiedRefMaterialCodeable
Definition

This extension links this observation with the certified reference material used for the calibration. The certified reference material is identified by using a CodeableConcept. This extension should be used when the unit is UCUM [IU].

ShortCertified Reference Material: CodeableConcept
Control0..*
TypeExtension(Certified Reference Material: CodeableConcept) (Extension Type: CodeableConcept)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Observation.extension:certifiedRefMaterialIdentifer
Slice NamecertifiedRefMaterialIdentifer
Definition

This extension links this observation with the certified reference material used for the calibration. The certified reference material is identified by using an Identifier. This extension should be used when the unit is UCUM [IU].

ShortCertified Reference Material: Identifier
Control0..*
TypeExtension(Certified Reference Material: Identifier) (Extension Type: Identifier)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
50. Observation.extension:accredited
Slice Nameaccredited
Definition

Indicates that this laboratory test was/is accredited.

ShortAccredited test
Control0..1
TypeExtension(Many: Laboratory Accredited) (Extension Type: boolean)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
52. Observation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. Observation.basedOn
Definition

A plan, proposal or order that is fulfilled in whole or in part by this event. For example, a MedicationRequest may require a patient to have laboratory test performed before it is dispensed.

ShortFulfills plan, proposal or order
Control0..*
TypeReference(ServiceRequest: Laboratory, CarePlan, DeviceRequest, ImmunizationRecommendation, MedicationRequest, NutritionOrder, ServiceRequest)
Is Modifierfalse
Obligations
    ObligationsActor
    SHOULD:handleMyHealth@EU Handler
    Summarytrue
    Requirements

    EHDSObservation.order


    Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

    Alternate NamesFulfills
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Observation.status
    Definition

    The status of the result value.

    Shortregistered | preliminary | final | amended +
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from ObservationStatushttp://hl7.org/fhir/ValueSet/observation-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/observation-status|4.0.1)

    Codes providing the status of an observation.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    EHDSObservation.header.status


    Need to track the status of individual results. Some results are finalized before the whole report is finalized.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. Observation.category
    Definition

    A code that classifies the general type of observation being made.

    ShortClassification of type of observation
    Comments

    In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

    Control10..*
    BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from eHDSI Observation categoryhttp://hl7.org/fhir/ValueSet/observation-category|4.0.1
    (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSIObservationCategory)
    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Used for filtering what observations are retrieved and displayed.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Observation.category. The slices are Unordered and Open, and can be differentiated using the following discriminators:
    • pattern @ $this

    Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

    60. Observation.category:laboratory
    Slice Namelaboratory
    Definition

    A code that classifies the general type of observation being made.

    ShortClassification of type of observation
    Comments

    In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

    Control10..1*
    BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from eHDSI Observation categoryhttp://hl7.org/fhir/ValueSet/observation-category|4.0.1
    (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSIObservationCategory)
    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Used for filtering what observations are retrieved and displayed.

    Pattern Value
    {
      "coding" : [
        {
          "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
          "code" : "laboratory"
        }
      ]
    }
    <category>
      <coding>
        <system value="http://terminology.hl7.org/CodeSystem/observation-category"/>
        <code value="laboratory"/>
      </coding>
    </category>
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    62. Observation.category:studyType
    Slice NamestudyType
    Definition

    A code that classifies the general type of observation being made.

    ShortThe way of grouping of the test results into clinically meaningful domains (e.g. hematology study, microbiology study, etc.)Classification of type of observation
    Comments

    In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

    Control0..*
    BindingThe codes SHALL be taken from The codes SHOULD be taken from Laboratory Study Typeshttp://hl7.org/fhir/ValueSet/observation-category|4.0.1
    (required to http://hl7.eu/fhir/laboratory/ValueSet/lab-studyType-eu-lab)
    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Used for filtering what observations are retrieved and displayed.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    64. Observation.category:specialty
    Slice Namespecialty
    Definition

    A code that classifies the general type of observation being made.

    ShortThe clinical domain of the laboratory performing the observation (e.g. microbiology, toxicology, chemistry)Classification of type of observation
    Comments

    In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

    Control0..*
    BindingThe codes SHALL be taken from The codes SHOULD be taken from Laboratory Specialtyhttp://hl7.org/fhir/ValueSet/observation-category|4.0.1
    (required to http://hl7.eu/fhir/laboratory/ValueSet/lab-specialty-eu-lab)
    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Used for filtering what observations are retrieved and displayed.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    66. Observation.code
    Definition

    Describes what was observed. Sometimes this is called the observation "name".

    ShortType of observation (code / type)
    Comments

    All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

    Control1..1
    BindingThe codes SHALL be taken from For example codes, see eHDSI Laboratory Codes With Exceptionshttp://hl7.org/fhir/ValueSet/observation-codes|4.0.1
    (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSILabCodeWithExceptions)
    TypeCodeableConcept
    Is Modifierfalse
    Obligations
      ObligationsActor
      SHALL:handleMyHealth@EU Handler
      Summarytrue
      Requirements

      EHDSObservation.code


      Knowing what kind of observation is being made is essential to understanding the observation.

      Alternate NamesName
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      68. Observation.subject
      Definition

      The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

      ShortWho and/or what the observation is about
      Comments

      One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

      Control10..1
      TypeReference(Patient (MyHealth@EU Core), Patient, Group, Device, Location)
      Is Modifierfalse
      Summarytrue
      Requirements

      EHDSObservation.header.subject


      Observations have no value if you don't know who or what they're about.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      70. Observation.focus
      Definition

      The actual focus of an observation when it is not the patient of record representing something or someone associated with the patient such as a spouse, parent, fetus, or donor. For example, fetus observations in a mother's record. The focus of an observation could also be an existing condition, an intervention, the subject's diet, another observation of the subject, or a body structure such as tumor or implanted device. An example use case would be using the Observation resource to capture whether the mother is trained to change her child's tracheostomy tube. In this example, the child is the patient of record and the mother is the focus.

      ShortWhat the observation is about, when it is not about the subject of record
      Comments

      Typically, an observation is made about the subject - a patient, or group of patients, location, or device - and the distinction between the subject and what is directly measured for an observation is specified in the observation code itself ( e.g., "Blood Glucose") and does not need to be represented separately using this element. Use specimen if a reference to a specimen is required. If a code is required instead of a resource use either bodysite for bodysites or the standard extension focusCode.

      Control0..*
      TypeReference(Patient (MyHealth@EU Core), RelatedPerson: Animal specimen source, Location (MyHealth@EU Core), Substance, BiologicallyDerivedProduct, Resource)
      Is Modifierfalse
      Summarytrue
      Requirements

      EHDSObservation.directSubject[x]

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      72. Observation.effective[x]
      Definition

      The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

      ShortClinically relevant time/time-period for observation
      Comments

      At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

      Control10..1
      TypeChoice of: dateTime, Period, Timing, instant
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Obligations
        ObligationsActor
        SHALL:handleMyHealth@EU Handler
        Summarytrue
        Requirements

        EHDSObservation.observationDate[x]


        Knowing when an observation was deemed true is important to its relevance as well as determining trends.

        Alternate NamesOccurrence
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        74. Observation.performer
        Definition

        Who was responsible for asserting the observed value as "true".

        ShortWho is responsible for the observation
        Control10..*
        TypeReference(Practitioner (MyHealth@EU Core), PractitionerRole (MyHealth@EU Core), Organization (MyHealth@EU Core), Practitioner, PractitionerRole, Organization, CareTeam, Patient, RelatedPerson)
        Is Modifierfalse
        Obligations
          ObligationsActor
          SHOULD:handleMyHealth@EU Handler
          Summarytrue
          Requirements

          EHDSObservation.header.performer


          May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          76. Observation.performer.extension:performerFunction
          Slice NameperformerFunction
          Definition

          Distinguishes the type of involvement of the performer in the event. For example, 'author', 'verifier' or 'responsible party'.

          ShortType of performance
          Comments

          If a Practitioner(Role) is involved in multiple roles, the Practitioner(Role) has to be added multiple times.

          Control0..1
          TypeExtension(Performer function) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Summaryfalse
          Requirements

          EHDSObservation.performer.function

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          78. Observation.value[x]
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          EHDSObservation.result.value[x]


          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Observation.value[x]. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
          • type @ $this
          80. Observation.value[x]:valueQuantity
          Slice NamevalueQuantity
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          TypeQuantity(Quantity (MyHealth@EU Core)), dateTime, boolean, string, SampledData, Period, Ratio, integer, time, Range, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          82. Observation.value[x]:valueQuantity.extension:uncertainty
          Slice Nameuncertainty
          Definition

          The primary measure of variance/uncertainty of the value (the square root of the sum of the squares of the differences between all data points and the mean).

          ShortStandard Deviation (same units as the quantity)
          Comments

          standardDeviation has the same units as the quantity. It is used to normalize the data for computing the distribution function. Applications that cannot deal with probability distributions can still get an idea about the confidence level by looking at standardDeviation.

          Control0..1
          TypeExtension(Uncertainty) (Extension Type: decimal)
          Is Modifierfalse
          Summaryfalse
          Requirements

          EHDSObservation.result.uncertainty

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          84. Observation.value[x]:valueQuantity.comparator
          Definition

          How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

          Short< | <= | >= | > - how to understand the value
          Control0..1
          BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1
          (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

          How the Quantity should be understood and represented.

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

          Meaning if MissingIf there is no comparator, then there is no modification of the value
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          86. Observation.value[x]:valueCodeableConcept
          Slice NamevalueCodeableConcept
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          BindingThe codes SHALL be taken from For codes, see eHDSI Results Coded Value Laboratory With Exceptions
          (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIResultsCodedValueLaboratory)
          TypeCodeableConcept, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, Range
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          88. Observation.value[x]:valueRatio
          Slice NamevalueRatio
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          TypeRatio(Ratio (MyHealth@EU Core)), dateTime, boolean, string, SampledData, Quantity, Period, integer, time, Range, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          90. Observation.value[x]:valueString
          Slice NamevalueString
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          Typestring, dateTime, boolean, SampledData, Quantity, Period, Ratio, integer, time, Range, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          92. Observation.value[x]:valueBoolean
          Slice NamevalueBoolean
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          Typeboolean, dateTime, string, SampledData, Quantity, Period, Ratio, integer, time, Range, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          94. Observation.value[x]:valueInteger
          Slice NamevalueInteger
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          Typeinteger, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, time, Range, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          96. Observation.value[x]:valueRange
          Slice NamevalueRange
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          TypeRange(Range (MyHealth@EU Core)), dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          98. Observation.value[x]:valueSampledData
          Slice NamevalueSampledData
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          TypeSampledData, dateTime, boolean, string, Quantity, Period, Ratio, integer, time, Range, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          100. Observation.value[x]:valueTime
          Slice NamevalueTime
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          Typetime, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, Range, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          102. Observation.value[x]:valueDateTime
          Slice NamevalueDateTime
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          TypedateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, Range, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          104. Observation.value[x]:valuePeriod
          Slice NamevaluePeriod
          Definition

          The information determined as a result of making the observation, if the information has a simple value.

          ShortLaboratory result valueActual result
          Comments

          An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

          Control0..1
          This element is affected by the following invariants: obs-7
          TypePeriod, dateTime, boolean, string, SampledData, Quantity, Ratio, integer, time, Range, CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summarytrue
          Requirements

          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          106. Observation.dataAbsentReason
          Definition

          Provides a reason why the expected value in the element Observation.value[x] is missing.

          ShortWhy the result is missing
          Comments

          Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory".

          The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

          Control0..1
          This element is affected by the following invariants: obs-6
          BindingUnless not suitable, these codes SHALL be taken from eHDSI Data Absent Reasonhttp://hl7.org/fhir/ValueSet/data-absent-reason|4.0.1
          (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSIDataAbsentReason)
          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          EHDSObservation.dataAbsentReason


          For many results it is necessary to handle exceptional values in measurements.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          108. Observation.interpretation
          Definition

          A categorical assessment of an observation value. For example, high, low, normal.

          ShortHigh, low, normal, etc.
          Comments

          Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

          Control0..*
          BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from eHDSI Observation Interpretation With Exceptionshttp://hl7.org/fhir/ValueSet/observation-interpretation|4.0.1
          (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIObservationInterpretationWithExceptions)
          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          EHDSObservation.interpretation


          For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

          Alternate NamesAbnormal Flag
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          110. Observation.bodySite
          Definition

          Indicates the site on the subject's body where the observation was made (i.e. the target site).

          ShortObserved body part
          Comments

          Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component.

          If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite.

          Control0..1
          BindingThe codes SHALL be taken from For example codes, see eHDSI Body Site With Exceptionshttp://hl7.org/fhir/ValueSet/body-site|4.0.1
          (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIBodySiteWithExceptions)
          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          EHDSObservation.anatomicLocation

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          112. Observation.bodySite.extension:bodySite
          Slice NamebodySite
          Definition

          Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

          ShortTarget anatomic location or structure
          Control0..1
          TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          114. Observation.bodySite.extension:bodySite.extension
          Definition

          An Extension


          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortExtensionAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..0*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Observation.bodySite.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          116. Observation.bodySite.extension:bodySite.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          Fixed Value
          {
            "url" : "http://hl7.org/fhir/StructureDefinition/bodySite"
          }
          <url value="http://hl7.org/fhir/StructureDefinition/bodySite"/>
          118. Observation.bodySite.extension:bodySite.value[x]
          Definition

          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

          ShortValue of extension
          Control10..1
          TypeReference(BodyStructure (MyHealth@EU Core)), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          120. Observation.method
          Definition

          Indicates the mechanism used to perform the observation.

          ShortHow it was done
          Comments

          Only used if not implicit in code for Observation.code.

          Control0..1
          BindingThe codes SHALL be taken from For example codes, see eHDSI Laboratory Technique With Exceptionshttp://hl7.org/fhir/ValueSet/observation-methods|4.0.1
          (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSILabTechniqueWithExceptions)
          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          EHDSObservation.method


          In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          122. Observation.specimen
          Definition

          The specimen that was used when this observation was made.

          ShortSpecimen used for the observationSpecimen used for this observation
          Comments

          Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

          Control0..1
          TypeReference(Specimen: Laboratory, Specimen)
          Is Modifierfalse
          Obligations
            ObligationsActor
            SHOULD:handleMyHealth@EU Handler
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            124. Observation.device
            Definition

            The device used to generate the observation data.

            Short(Measurement) Device
            Comments

            Note that this is not meant to represent a device involved in the transmission of the result, e.g., a gateway. Such devices may be documented using the Provenance resource where relevant.

            Control0..1
            TypeReference(Device: Measuring, Device, DeviceMetric)
            Is Modifierfalse
            Summaryfalse
            Requirements

            Device information for laboratory observations

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            126. Observation.referenceRange
            Definition

            Guidance on how to interpret the value by comparison to a normal or recommended range. Multiple reference ranges are interpreted as an "OR". In other words, to represent two distinct target populations, two referenceRange elements would be used.

            ShortProvides guide for interpretation
            Comments

            Reference-range bounds are inclusive when no comparator is present. Use lowComparator or highComparator to state the comparator for an exclusive or explicitly inclusive bound. These modifier extensions pre-adopt the comparator on the reference-range bounds introduced in FHIR R6.


            Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Requirements

            EHDSObservation.referenceRange


            Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            obs-3: Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())
            obs-3: Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())
            128. Observation.referenceRange.modifierExtension
            Definition

            An Extension


            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensionExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Observation.referenceRange.modifierExtension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            130. Observation.referenceRange.modifierExtension:lowComparator
            Slice NamelowComparator
            Definition

            The comparator for Observation.referenceRange.low. This modifier extension pre-adopts the R6 comparator on the low reference-range bound.

            ShortObservation Reference Range Low Comparator
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Observation Reference Range Low Comparator) (Extension Type: code)
            Is Modifiertrue because Changes the interpretation of Observation.referenceRange.low by stating whether the bound is inclusive or exclusive.
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            132. Observation.referenceRange.modifierExtension:highComparator
            Slice NamehighComparator
            Definition

            The comparator for Observation.referenceRange.high. This modifier extension pre-adopts the R6 comparator on the high reference-range bound.

            ShortObservation Reference Range High Comparator
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Observation Reference Range High Comparator) (Extension Type: code)
            Is Modifiertrue because Changes the interpretation of Observation.referenceRange.high by stating whether the bound is inclusive or exclusive.
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            134. Observation.referenceRange.type
            Definition

            Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.

            ShortReference range qualifier
            Comments

            This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.

            Control0..1
            BindingThe codes SHALL be taken from The codes SHOULD be taken from eHDSI Reference Range Meaning With Exceptionshttp://hl7.org/fhir/ValueSet/referencerange-meaning|4.0.1
            (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIReferenceRangeMeaningWithExceptions)
            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Requirements

            Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            136. Observation.referenceRange.appliesTo
            Definition

            Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an "AND" of the target populations. For example, to represent a target population of African American females, both a code of female and a code for African American would be used.

            ShortReference range population
            Comments

            This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.

            Control0..*
            BindingThe codes SHALL be taken from For example codes, see eHDSI Reference Range Applies To With Exceptionshttp://hl7.org/fhir/ValueSet/referencerange-appliesto|4.0.1
            (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIReferenceRangeAppliesToWithExceptions)
            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Requirements

            Need to be able to identify the target population for proper interpretation.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            138. Observation.hasMember
            Definition

            This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.

            ShortRelated resource that belongs to the Observation group
            Comments

            When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.


            When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.

            Control0..*
            TypeReference(ObservationResults: Laboratory, Observation, QuestionnaireResponse, MolecularSequence)
            Is Modifierfalse
            Summarytrue
            Requirements

            EHDSObservation.hasMember[x]

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            140. Observation.component
            Definition

            Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

            ShortLaboratory resultComponent results
            Comments

            For a discussion on the ways Observations can be assembled in groups together see Notes below.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summarytrue
            Requirements

            EHDSObservation.component


            Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            obs-value-2: The elements Observation.component.extension:value-r5 and Observation.component.value[x] SHALL not be used simultaneously. (value.empty() or extension('http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.component.value').empty())
            142. Observation.component.extension:value-r5
            Slice Namevalue-r5
            Definition

            When the result is a Diagram or Picture (Microbiology), then the Attachment data type should be used. In FHIR R4 this can be done by preadopting the R5 Observation.component.value[x] element using the cross-version extension.

            Shortonly for Diagrams or Pictures
            Comments

            Element Observation.component.value[x] is mapped to FHIR R4 element Observation.component.value[x] as SourceIsBroaderThanTarget. The mappings for Observation.component.value[x] do not cover the following types: Attachment, Reference. The target context Observation.component.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Observation.component. Used when observation has a set of component observations:

            • An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived).
            • If a value is present, the datatype for this element should be determined by the code.
            • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
            • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
            • If a value is present, the datatype for this element should be determined by the code.
            • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
            • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
            • The usage of valueReference is restricted to the MolecularSequence resource when used as a definitional resource, not as a patient-specific finding. .
            • For additional guidance, see the Notes section below.
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(R5: value additional types) (Extension Type: Choice of: Attachment, Reference(Cross-version Profile for R5.MolecularSequence for use in FHIR R4, MolecularSequence))
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            144. Observation.component.extension:value-r5.extension
            Definition

            An Extension


            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortExtensionAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..0*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Observation.component.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            146. Observation.component.extension:value-r5.url
            Definition

            Source of the definition for the extension code - a logical name or a URL.

            Shortidentifies the meaning of the extension
            Comments

            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

            Control1..1
            Typeuri
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            Fixed Value
            {
              "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.component.value"
            }
            <url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.component.value"/>
            148. Observation.component.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            150. Observation.component.code
            Definition

            Describes what was observed. Sometimes this is called the observation "code".

            ShortType of component observation (code / type)
            Comments

            All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

            Control1..1
            BindingThe codes SHALL be taken from For example codes, see eHDSI Laboratory Codes With Exceptionshttp://hl7.org/fhir/ValueSet/observation-codes|4.0.1
            (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSILabCodeWithExceptions)
            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Requirements

            EHDSObservation.component.code


            Knowing what kind of observation is being made is essential to understanding the observation.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            152. Observation.component.value[x]
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            EHDSObservation.component.result.value[x]


            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Observation.component.value[x]. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
            • type @ $this
            154. Observation.component.value[x]:valueQuantity
            Slice NamevalueQuantity
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            TypeQuantity(Quantity (MyHealth@EU Core)), dateTime, boolean, string, SampledData, Period, Ratio, integer, time, Range, CodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            156. Observation.component.value[x]:valueQuantity.extension:uncertainty
            Slice Nameuncertainty
            Definition

            The primary measure of variance/uncertainty of the value (the square root of the sum of the squares of the differences between all data points and the mean).

            ShortStandard Deviation (same units as the quantity)
            Comments

            standardDeviation has the same units as the quantity. It is used to normalize the data for computing the distribution function. Applications that cannot deal with probability distributions can still get an idea about the confidence level by looking at standardDeviation.

            Control0..1
            TypeExtension(Uncertainty) (Extension Type: decimal)
            Is Modifierfalse
            Summaryfalse
            Requirements

            EHDSObservation.component.result.uncertainty

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            158. Observation.component.value[x]:valueQuantity.comparator
            Definition

            How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

            Short< | <= | >= | > - how to understand the value
            Control0..1
            BindingThe codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1
            (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

            How the Quantity should be understood and represented.

            Typecode
            Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

            Meaning if MissingIf there is no comparator, then there is no modification of the value
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            160. Observation.component.value[x]:valueCodeableConcept
            Slice NamevalueCodeableConcept
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            BindingThe codes SHALL be taken from For codes, see eHDSI Results Coded Value Laboratory With Exceptions
            (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIResultsCodedValueLaboratory)
            TypeCodeableConcept, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, Range
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            162. Observation.component.value[x]:valueRatio
            Slice NamevalueRatio
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            TypeRatio(Ratio (MyHealth@EU Core)), dateTime, boolean, string, SampledData, Quantity, Period, integer, time, Range, CodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            164. Observation.component.value[x]:valueString
            Slice NamevalueString
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            Typestring, dateTime, boolean, SampledData, Quantity, Period, Ratio, integer, time, Range, CodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            166. Observation.component.value[x]:valueBoolean
            Slice NamevalueBoolean
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            Typeboolean, dateTime, string, SampledData, Quantity, Period, Ratio, integer, time, Range, CodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            168. Observation.component.value[x]:valueInteger
            Slice NamevalueInteger
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            Typeinteger, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, time, Range, CodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            170. Observation.component.value[x]:valueRange
            Slice NamevalueRange
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            TypeRange(Range (MyHealth@EU Core)), dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, CodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            172. Observation.component.value[x]:valueSampledData
            Slice NamevalueSampledData
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            TypeSampledData, dateTime, boolean, string, Quantity, Period, Ratio, integer, time, Range, CodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            174. Observation.component.value[x]:valueTime
            Slice NamevalueTime
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            Typetime, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, Range, CodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            176. Observation.component.value[x]:valueDateTime
            Slice NamevalueDateTime
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            TypedateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, Range, CodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            178. Observation.component.value[x]:valuePeriod
            Slice NamevaluePeriod
            Definition

            The information determined as a result of making the observation, if the information has a simple value.

            ShortLaboratory component result valueActual component result
            Comments

            Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

            Control0..1
            TypePeriod, dateTime, boolean, string, SampledData, Quantity, Ratio, integer, time, Range, CodeableConcept
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summarytrue
            Requirements

            An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            180. Observation.component.dataAbsentReason
            Definition

            Provides a reason why the expected value in the element Observation.component.value[x] is missing.

            ShortWhy the component result is missing
            Comments

            "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

            The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

            Control0..1
            This element is affected by the following invariants: obs-6
            BindingUnless not suitable, these codes SHALL be taken from eHDSI Data Absent Reasonhttp://hl7.org/fhir/ValueSet/data-absent-reason|4.0.1
            (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSIDataAbsentReason)
            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Requirements

            EHDSObservation.component.dataAbsentReason


            For many results it is necessary to handle exceptional values in measurements.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            182. Observation.component.interpretation
            Definition

            A categorical assessment of an observation value. For example, high, low, normal.

            ShortHigh, low, normal, etc.
            Comments

            Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

            Control0..*
            BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from eHDSI Observation Interpretation With Exceptionshttp://hl7.org/fhir/ValueSet/observation-interpretation|4.0.1
            (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIObservationInterpretationWithExceptions)
            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Requirements

            EHDSObservation.component.interpretation


            For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

            Alternate NamesAbnormal Flag
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

            See the documentation on how to interpret the contents of this table

            0. Observation
            Definition

            This observation may represent the result of a simple laboratory test such as hematocrit or it may group the set of results produced by a multi-test study or panel such as a complete blood count, a dynamic function test, a urine specimen study. In the latter case, the observation carries the overall conclusion of the study and references the atomic results of the study as "has-member" child observations

            ShortLaboratory result for a simple test or for a panel/study
            Comments

            Represents either a lab simple observation or the group of observations produced by a laboratory study.

            Impose ProfileThis profile also requires that the instance also conform this additional profile:
            Invariantseu-lab-1: If observation status is other then "registered" or "cancelled", at least one of these Observation elements shall be provided with an actual value: "value", the R5 "value[x]" extension, "dataAbsentReason", "hasMember" or "component" ((status in ('registered'|'cancelled')) or value.hasValue() or value.children().exclude(value.extension).exists() or extension.where(url='http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.value').value.exists() or hasMember.exists() or component.exists() or dataAbsentReason.exists())
            eu-lab-2: If observation status is other then "registered" or "cancelled", every Observation.component shall provide one of these elements with an actual value: "value", the R5 "component.value[x]" extension or "dataAbsentReason" ((status in ('registered'|'cancelled')) or component.all(value.hasValue() or value.children().exclude(value.extension).exists() or extension.where(url='http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.component.value').value.exists() or dataAbsentReason.exists()))
            2. Observation.extension:supportingInfo
            Slice NamesupportingInfo
            Control0..*
            TypeExtension(Supporting info) (Extension Type: Reference(Resource))
            4. Observation.extension:labTestKit
            Slice NamelabTestKit
            Definition

            The laboratory test kit used for this test.

            ShortLaboratory Test Kit
            Control0..*
            TypeExtension(Device Laboratory Test Kit) (Extension Type: Reference(Device))
            6. Observation.extension:certifiedRefMaterialCodeable
            Slice NamecertifiedRefMaterialCodeable
            Control0..*
            TypeExtension(Certified Reference Material: CodeableConcept) (Extension Type: CodeableConcept)
            8. Observation.extension:certifiedRefMaterialIdentifer
            Slice NamecertifiedRefMaterialIdentifer
            Control0..*
            TypeExtension(Certified Reference Material: Identifier) (Extension Type: Identifier)
            10. Observation.extension:accredited
            Slice Nameaccredited
            Definition

            Indicates that this laboratory test was/is accredited.

            ShortAccredited test
            Control0..1
            TypeExtension(Many: Laboratory Accredited) (Extension Type: boolean)
            12. Observation.basedOn
            TypeReference(ServiceRequest: Laboratory)
            Obligations
              ObligationsActor
              SHOULD:handleMyHealth@EU Handler
              14. Observation.category
              SlicingThis element introduces a set of slices on Observation.category. The slices are Unordered and Open, and can be differentiated using the following discriminators:
              • pattern @ $this

              Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

              16. Observation.category:laboratory
              Slice Namelaboratory
              Control1..1
              Pattern Value
              {
                "coding" : [
                  {
                    "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
                    "code" : "laboratory"
                  }
                ]
              }
              <category>
                <coding>
                  <system value="http://terminology.hl7.org/CodeSystem/observation-category"/>
                  <code value="laboratory"/>
                </coding>
              </category>
              18. Observation.category:studyType
              Slice NamestudyType
              ShortThe way of grouping of the test results into clinically meaningful domains (e.g. hematology study, microbiology study, etc.)
              Control0..*
              BindingThe codes SHALL be taken from Laboratory Study Types
              (required to http://hl7.eu/fhir/laboratory/ValueSet/lab-studyType-eu-lab)
              20. Observation.category:specialty
              Slice Namespecialty
              ShortThe clinical domain of the laboratory performing the observation (e.g. microbiology, toxicology, chemistry)
              Control0..*
              BindingThe codes SHALL be taken from Laboratory Specialty
              (required to http://hl7.eu/fhir/laboratory/ValueSet/lab-specialty-eu-lab)
              22. Observation.code
              BindingThe codes SHALL be taken from eHDSI Laboratory Codes With Exceptions
              (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSILabCodeWithExceptions)
              Obligations
                ObligationsActor
                SHALL:handleMyHealth@EU Handler
                24. Observation.focus
                TypeReference(Patient (MyHealth@EU Core), RelatedPerson: Animal specimen source, Location (MyHealth@EU Core), Substance, BiologicallyDerivedProduct)
                26. Observation.effective[x]
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Obligations
                  ObligationsActor
                  SHALL:handleMyHealth@EU Handler
                  28. Observation.performer
                  Control1..?
                  Obligations
                    ObligationsActor
                    SHOULD:handleMyHealth@EU Handler
                    30. Observation.value[x]
                    ShortLaboratory result value
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    32. Observation.value[x]:valueQuantity
                    Slice NamevalueQuantity
                    ShortLaboratory result value
                    TypeQuantity(Quantity (MyHealth@EU Core))
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    34. Observation.value[x]:valueCodeableConcept
                    Slice NamevalueCodeableConcept
                    ShortLaboratory result value
                    BindingThe codes SHALL be taken from eHDSI Results Coded Value Laboratory With Exceptions
                    (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIResultsCodedValueLaboratory)
                    TypeCodeableConcept
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    36. Observation.value[x]:valueRatio
                    Slice NamevalueRatio
                    ShortLaboratory result value
                    TypeRatio(Ratio (MyHealth@EU Core))
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    38. Observation.value[x]:valueString
                    Slice NamevalueString
                    ShortLaboratory result value
                    Typestring
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    40. Observation.value[x]:valueBoolean
                    Slice NamevalueBoolean
                    ShortLaboratory result value
                    Typeboolean
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    42. Observation.value[x]:valueInteger
                    Slice NamevalueInteger
                    ShortLaboratory result value
                    Typeinteger
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    44. Observation.value[x]:valueRange
                    Slice NamevalueRange
                    ShortLaboratory result value
                    TypeRange(Range (MyHealth@EU Core))
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    46. Observation.value[x]:valueSampledData
                    Slice NamevalueSampledData
                    ShortLaboratory result value
                    TypeSampledData
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    48. Observation.value[x]:valueTime
                    Slice NamevalueTime
                    ShortLaboratory result value
                    Typetime
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    50. Observation.value[x]:valueDateTime
                    Slice NamevalueDateTime
                    ShortLaboratory result value
                    TypedateTime
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    52. Observation.value[x]:valuePeriod
                    Slice NamevaluePeriod
                    ShortLaboratory result value
                    TypePeriod
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    54. Observation.method
                    BindingThe codes SHALL be taken from eHDSI Laboratory Technique With Exceptions
                    (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSILabTechniqueWithExceptions)
                    56. Observation.specimen
                    TypeReference(Specimen: Laboratory)
                    Obligations
                      ObligationsActor
                      SHOULD:handleMyHealth@EU Handler
                      58. Observation.device
                      TypeReference(Device: Measuring)
                      60. Observation.referenceRange
                      Comments

                      Reference-range bounds are inclusive when no comparator is present. Use lowComparator or highComparator to state the comparator for an exclusive or explicitly inclusive bound. These modifier extensions pre-adopt the comparator on the reference-range bounds introduced in FHIR R6.

                      62. Observation.referenceRange.modifierExtension
                      SlicingThis element introduces a set of slices on Observation.referenceRange.modifierExtension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      64. Observation.referenceRange.modifierExtension:lowComparator
                      Slice NamelowComparator
                      Control0..1
                      TypeExtension(Observation Reference Range Low Comparator) (Extension Type: code)
                      66. Observation.referenceRange.modifierExtension:highComparator
                      Slice NamehighComparator
                      Control0..1
                      TypeExtension(Observation Reference Range High Comparator) (Extension Type: code)
                      68. Observation.hasMember
                      TypeReference(ObservationResults: Laboratory)
                      70. Observation.component
                      ShortLaboratory result
                      72. Observation.component.code
                      BindingThe codes SHALL be taken from eHDSI Laboratory Codes With Exceptions
                      (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSILabCodeWithExceptions)
                      74. Observation.component.value[x]
                      ShortLaboratory component result value
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      76. Observation.component.value[x]:valueQuantity
                      Slice NamevalueQuantity
                      ShortLaboratory component result value
                      TypeQuantity(Quantity (MyHealth@EU Core))
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      78. Observation.component.value[x]:valueCodeableConcept
                      Slice NamevalueCodeableConcept
                      ShortLaboratory component result value
                      BindingThe codes SHALL be taken from eHDSI Results Coded Value Laboratory With Exceptions
                      (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIResultsCodedValueLaboratory)
                      TypeCodeableConcept
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      80. Observation.component.value[x]:valueRatio
                      Slice NamevalueRatio
                      ShortLaboratory component result value
                      TypeRatio(Ratio (MyHealth@EU Core))
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      82. Observation.component.value[x]:valueString
                      Slice NamevalueString
                      ShortLaboratory component result value
                      Typestring
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      84. Observation.component.value[x]:valueBoolean
                      Slice NamevalueBoolean
                      ShortLaboratory component result value
                      Typeboolean
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      86. Observation.component.value[x]:valueInteger
                      Slice NamevalueInteger
                      ShortLaboratory component result value
                      Typeinteger
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      88. Observation.component.value[x]:valueRange
                      Slice NamevalueRange
                      ShortLaboratory component result value
                      TypeRange(Range (MyHealth@EU Core))
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      90. Observation.component.value[x]:valueSampledData
                      Slice NamevalueSampledData
                      ShortLaboratory component result value
                      TypeSampledData
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      92. Observation.component.value[x]:valueTime
                      Slice NamevalueTime
                      ShortLaboratory component result value
                      Typetime
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      94. Observation.component.value[x]:valueDateTime
                      Slice NamevalueDateTime
                      ShortLaboratory component result value
                      TypedateTime
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      96. Observation.component.value[x]:valuePeriod
                      Slice NamevaluePeriod
                      ShortLaboratory component result value
                      TypePeriod
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]

                      See the documentation on how to interpret the contents of this table

                      0. Observation
                      Definition

                      This observation may represent the result of a simple laboratory test such as hematocrit or it may group the set of results produced by a multi-test study or panel such as a complete blood count, a dynamic function test, a urine specimen study. In the latter case, the observation carries the overall conclusion of the study and references the atomic results of the study as "has-member" child observations

                      ShortLaboratory result for a simple test or for a panel/study
                      Comments

                      Represents either a lab simple observation or the group of observations produced by a laboratory study.

                      Control0..*
                      Is Modifierfalse
                      Impose ProfileThis profile also requires that the instance also conform this additional profile:
                      Summaryfalse
                      Alternate NamesVital Signs, Measurement, Results, Tests
                      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                      dom-6: A resource should have narrative for robust management (text.`div`.exists())
                      obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
                      obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
                      obs-value-1: The elements Observation.extension:value-r5 and Observation.value[x] SHALL not be used simultaneously. (value.empty() or extension('http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.value').empty())
                      eu-lab-1: If observation status is other then "registered" or "cancelled", at least one of these Observation elements shall be provided with an actual value: "value", the R5 "value[x]" extension, "dataAbsentReason", "hasMember" or "component" ((status in ('registered'|'cancelled')) or value.hasValue() or value.children().exclude(value.extension).exists() or extension.where(url='http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.value').value.exists() or hasMember.exists() or component.exists() or dataAbsentReason.exists())
                      eu-lab-2: If observation status is other then "registered" or "cancelled", every Observation.component shall provide one of these elements with an actual value: "value", the R5 "component.value[x]" extension or "dataAbsentReason" ((status in ('registered'|'cancelled')) or component.all(value.hasValue() or value.children().exclude(value.extension).exists() or extension.where(url='http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.component.value').value.exists() or dataAbsentReason.exists()))
                      2. Observation.id
                      Definition

                      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                      ShortLogical id of this artifact
                      Comments

                      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                      Control0..1
                      Typeid
                      Is Modifierfalse
                      Summarytrue
                      4. Observation.meta
                      Definition

                      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                      ShortMetadata about the resource
                      Control0..1
                      TypeMeta
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      6. Observation.implicitRules
                      Definition

                      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                      ShortA set of rules under which this content was created
                      Comments

                      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                      Control0..1
                      Typeuri
                      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      8. Observation.language
                      Definition

                      The base language in which the resource is written.

                      ShortLanguage of the observation
                      Comments

                      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                      Control0..1
                      BindingThe codes SHALL be taken from eHDSI Language
                      (required to http://terminology.ehdsi.eu/ValueSet/eHDSILanguage)
                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      10. Observation.text
                      Definition

                      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                      ShortText summary of the resource, for human interpretation
                      Comments

                      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                      Control0..1
                      TypeNarrative
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesnarrative, html, xhtml, display
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      12. Observation.contained
                      Definition

                      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                      ShortContained, inline Resources
                      Comments

                      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                      Control0..*
                      TypeResource
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesinline resources, anonymous resources, contained resources
                      14. Observation.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Observation.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      16. Observation.extension:bodyStructure
                      Slice NamebodyStructure
                      Definition

                      R5: Observation.bodyStructure (new:Reference(BodyStructure))

                      ShortR5: Observed body structure (new)
                      Comments

                      Element Observation.bodyStructure has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.bodyStructure has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Only used if not implicit in code found in Observation.code or bodySite is used. In many systems, this may be represented as a related observation instead of an inline component.

                      Control0..1
                      This element is affected by the following invariants: ele-1
                      TypeExtension(R5: Observed body structure (new)) (Extension Type: Reference(Cross-version Profile for R5.BodyStructure for use in FHIR R4, BodyStructure))
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      EHDSObservation.anatomicLocation

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      18. Observation.extension:triggeredBy
                      Slice NametriggeredBy
                      Definition

                      R5: Observation.triggeredBy (new:BackboneElement)

                      ShortR5: Triggering observation(s) (new)
                      Comments

                      Element Observation.triggeredBy has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

                      Control0..*
                      This element is affected by the following invariants: ele-1
                      TypeExtension(R5: Triggering observation(s) (new)) (Complex Extension)
                      Is Modifierfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      20. Observation.extension:triggeredBy.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      22. Observation.extension:triggeredBy.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control2..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Observation.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      24. Observation.extension:triggeredBy.extension:observation
                      Slice Nameobservation
                      Definition

                      An Extension

                      ShortExtension
                      Control1..1
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      26. Observation.extension:triggeredBy.extension:observation.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      28. Observation.extension:triggeredBy.extension:observation.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..0
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Observation.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      30. Observation.extension:triggeredBy.extension:observation.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      Fixed Value
                      {
                        "url" : "observation"
                      }
                      <url value="observation"/>
                      32. Observation.extension:triggeredBy.extension:observation.value[x]
                      Definition

                      Reference to the triggering observation.

                      ShortTriggering observation
                      Control1..1
                      TypeReference(Observation: Medical Test Result (MyHealth@EU Core))
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      EHDSObservation.triggeredBy[x]

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      34. Observation.extension:triggeredBy.extension:type
                      Slice Nametype
                      Definition

                      R5: Observation.triggeredBy.type (new:code)

                      ShortR5: reflex | repeat | re-run (new)
                      Comments

                      Element Observation.triggeredBy.type is part of an existing definition because parent element Observation.triggeredBy requires a cross-version extension. Element Observation.triggeredBy.type has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy.type has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

                      Control1..1
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Element Observation.triggeredBy.type is part of an existing definition because parent element Observation.triggeredBy requires a cross-version extension. Element Observation.triggeredBy.type has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy.type has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      36. Observation.extension:triggeredBy.extension:type.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      38. Observation.extension:triggeredBy.extension:type.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Observation.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      40. Observation.extension:triggeredBy.extension:type.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      Fixed Value
                      {
                        "url" : "type"
                      }
                      <url value="type"/>
                      42. Observation.extension:triggeredBy.extension:type.value[x]
                      Definition

                      The type of trigger. Reflex | Repeat | Re-run.

                      Shortreflex | repeat | re-run
                      Control1..1
                      BindingThe codes SHALL be taken from R5ObservationTriggeredbytypeForR4 (0.1.0)
                      (required to http://hl7.org/fhir/uv/xver/ValueSet/R5-observation-triggeredbytype-for-R4|0.1.0)

                      The type of TriggeredBy Observation.

                      Typecode
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      44. Observation.extension:triggeredBy.extension:reason
                      Slice Namereason
                      Definition

                      R5: Observation.triggeredBy.reason (new:string)

                      ShortR5: Reason that the observation was triggered (new)
                      Comments

                      Element Observation.triggeredBy.reason is part of an existing definition because parent element Observation.triggeredBy requires a cross-version extension. Element Observation.triggeredBy.reason has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy.reason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

                      Control0..1
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Element Observation.triggeredBy.reason is part of an existing definition because parent element Observation.triggeredBy requires a cross-version extension. Element Observation.triggeredBy.reason has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy.reason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      46. Observation.extension:triggeredBy.extension:reason.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      48. Observation.extension:triggeredBy.extension:reason.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Observation.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      50. Observation.extension:triggeredBy.extension:reason.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      Fixed Value
                      {
                        "url" : "reason"
                      }
                      <url value="reason"/>
                      52. Observation.extension:triggeredBy.extension:reason.value[x]
                      Definition

                      Provides the reason why this observation was performed as a result of the observation(s) referenced.

                      ShortReason that the observation was triggered
                      Control0..1
                      Typestring
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      54. Observation.extension:triggeredBy.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      Fixed Value
                      {
                        "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.triggeredBy"
                      }
                      <url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.triggeredBy"/>
                      56. Observation.extension:triggeredBy.value[x]
                      Definition

                      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                      ShortValue of extension
                      Control0..0
                      TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      58. Observation.extension:value-r5
                      Slice Namevalue-r5
                      Definition

                      When the result is a Diagram or Picture (Microbiology), then the Attachment data type should be used. In FHIR R4 this can be done by preadopting the R5 Observation.value[x] element using the cross-version extension.

                      Shortonly for Diagrams or Pictures
                      Comments

                      Element Observation.value[x] is mapped to FHIR R4 element Observation.value[x] as SourceIsBroaderThanTarget. The mappings for Observation.value[x] do not cover the following types: Attachment, Reference. The target context Observation.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Observation.

                      • An observation may have:
                        1. a single value here
                        2. both a value and a set of related or component values
                        3. only a set of related or component values.
                      • If a value is present, the datatype for this element should be determined by the code.
                      • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
                      • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
                      • The usage of valueReference is restricted to the MolecularSequence resource when used as a definitional resource, not as a patient-specific finding. .
                      • For additional guidance, see the Notes section below.
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      TypeExtension(R5: value additional types) (Extension Type: Choice of: Attachment, Reference(Cross-version Profile for R5.MolecularSequence for use in FHIR R4, MolecularSequence))
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      60. Observation.extension:value-r5.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      62. Observation.extension:value-r5.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..0
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Observation.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      64. Observation.extension:value-r5.url
                      Definition

                      Source of the definition for the extension code - a logical name or a URL.

                      Shortidentifies the meaning of the extension
                      Comments

                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      Fixed Value
                      {
                        "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.value"
                      }
                      <url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.value"/>
                      66. Observation.extension:value-r5.value[x]
                      Definition

                      The information determined as a result of making the observation, if the information has a simple value.

                      ShortActual result
                      Comments
                      • An observation may have:
                        1. a single value here
                        2. both a value and a set of related or component values
                        3. only a set of related or component values.
                      • If a value is present, the datatype for this element should be determined by the code.
                      • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
                      • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
                      • The usage of valueReference is restricted to the MolecularSequence resource when used as a definitional resource, not as a patient-specific finding. .
                      • For additional guidance, see the Notes section below.
                      Control0..1
                      TypeAttachment
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      68. Observation.extension:supportingInfo
                      Slice NamesupportingInfo
                      Definition

                      Other resources from the patient record that may be relevant to the event. The information from these resources was either used to create the instance or is provided to help with its interpretation. This extension should not be used if more specific inline elements or extensions are available. For example, use Observation.hasMember instead of supportingInformation for representing the members of an Observation panel.

                      ShortOther information that may be relevant to this event.
                      Control0..*
                      TypeExtension(Supporting info) (Extension Type: Reference(Resource))
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      70. Observation.extension:labTestKit
                      Slice NamelabTestKit
                      Definition

                      The laboratory test kit used for this test.

                      ShortLaboratory Test Kit
                      Control0..*
                      TypeExtension(Device Laboratory Test Kit) (Extension Type: Reference(Device))
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      72. Observation.extension:certifiedRefMaterialCodeable
                      Slice NamecertifiedRefMaterialCodeable
                      Definition

                      This extension links this observation with the certified reference material used for the calibration. The certified reference material is identified by using a CodeableConcept. This extension should be used when the unit is UCUM [IU].

                      ShortCertified Reference Material: CodeableConcept
                      Control0..*
                      TypeExtension(Certified Reference Material: CodeableConcept) (Extension Type: CodeableConcept)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      74. Observation.extension:certifiedRefMaterialIdentifer
                      Slice NamecertifiedRefMaterialIdentifer
                      Definition

                      This extension links this observation with the certified reference material used for the calibration. The certified reference material is identified by using an Identifier. This extension should be used when the unit is UCUM [IU].

                      ShortCertified Reference Material: Identifier
                      Control0..*
                      TypeExtension(Certified Reference Material: Identifier) (Extension Type: Identifier)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      76. Observation.extension:accredited
                      Slice Nameaccredited
                      Definition

                      Indicates that this laboratory test was/is accredited.

                      ShortAccredited test
                      Control0..1
                      TypeExtension(Many: Laboratory Accredited) (Extension Type: boolean)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      78. Observation.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                      Summaryfalse
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      80. Observation.identifier
                      Definition

                      A unique identifier assigned to this observation.

                      ShortBusiness Identifier for observation
                      NoteThis is a business identifier, not a resource identifier (see discussion)
                      Control0..*
                      TypeIdentifier
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      EHDSObservation.header.identifier

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      82. Observation.basedOn
                      Definition

                      A plan, proposal or order that is fulfilled in whole or in part by this event. For example, a MedicationRequest may require a patient to have laboratory test performed before it is dispensed.

                      ShortFulfills plan, proposal or order
                      Control0..*
                      TypeReference(ServiceRequest: Laboratory)
                      Is Modifierfalse
                      Obligations
                        ObligationsActor
                        SHOULD:handleMyHealth@EU Handler
                        Summarytrue
                        Requirements

                        EHDSObservation.order

                        Alternate NamesFulfills
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        84. Observation.partOf
                        Definition

                        A larger event of which this particular Observation is a component or step. For example, an observation as part of a procedure.

                        ShortPart of referenced event
                        Comments

                        To link an Observation to an Encounter use encounter. See the Notes below for guidance on referencing another Observation.

                        Control0..*
                        TypeReference(MedicationAdministration, MedicationDispense, MedicationStatement, Procedure, Immunization, ImagingStudy)
                        Is Modifierfalse
                        Summarytrue
                        Alternate NamesContainer
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        86. Observation.status
                        Definition

                        The status of the result value.

                        Shortregistered | preliminary | final | amended +
                        Comments

                        This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

                        Control1..1
                        BindingThe codes SHALL be taken from ObservationStatus
                        (required to http://hl7.org/fhir/ValueSet/observation-status|4.0.1)

                        Codes providing the status of an observation.

                        Typecode
                        Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        EHDSObservation.header.status

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        88. Observation.category
                        Definition

                        A code that classifies the general type of observation being made.

                        ShortClassification of type of observation
                        Comments

                        In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

                        Control1..*
                        BindingUnless not suitable, these codes SHALL be taken from eHDSI Observation category
                        (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSIObservationCategory)
                        TypeCodeableConcept
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        Used for filtering what observations are retrieved and displayed.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on Observation.category. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                        • pattern @ $this

                        Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

                        90. Observation.category:laboratory
                        Slice Namelaboratory
                        Definition

                        A code that classifies the general type of observation being made.

                        ShortClassification of type of observation
                        Comments

                        In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

                        Control1..1
                        BindingUnless not suitable, these codes SHALL be taken from eHDSI Observation category
                        (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSIObservationCategory)
                        TypeCodeableConcept
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        Used for filtering what observations are retrieved and displayed.

                        Pattern Value
                        {
                          "coding" : [
                            {
                              "system" : "http://terminology.hl7.org/CodeSystem/observation-category",
                              "code" : "laboratory"
                            }
                          ]
                        }
                        <category>
                          <coding>
                            <system value="http://terminology.hl7.org/CodeSystem/observation-category"/>
                            <code value="laboratory"/>
                          </coding>
                        </category>
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        92. Observation.category:studyType
                        Slice NamestudyType
                        Definition

                        A code that classifies the general type of observation being made.

                        ShortThe way of grouping of the test results into clinically meaningful domains (e.g. hematology study, microbiology study, etc.)
                        Comments

                        In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

                        Control0..*
                        BindingThe codes SHALL be taken from Laboratory Study Types
                        (required to http://hl7.eu/fhir/laboratory/ValueSet/lab-studyType-eu-lab)
                        TypeCodeableConcept
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        Used for filtering what observations are retrieved and displayed.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        94. Observation.category:specialty
                        Slice Namespecialty
                        Definition

                        A code that classifies the general type of observation being made.

                        ShortThe clinical domain of the laboratory performing the observation (e.g. microbiology, toxicology, chemistry)
                        Comments

                        In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

                        Control0..*
                        BindingThe codes SHALL be taken from Laboratory Specialty
                        (required to http://hl7.eu/fhir/laboratory/ValueSet/lab-specialty-eu-lab)
                        TypeCodeableConcept
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        Used for filtering what observations are retrieved and displayed.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        96. Observation.code
                        Definition

                        Describes what was observed. Sometimes this is called the observation "name".

                        ShortType of observation (code / type)
                        Comments

                        All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                        Control1..1
                        BindingThe codes SHALL be taken from eHDSI Laboratory Codes With Exceptions
                        (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSILabCodeWithExceptions)
                        TypeCodeableConcept
                        Is Modifierfalse
                        Obligations
                          ObligationsActor
                          SHALL:handleMyHealth@EU Handler
                          Summarytrue
                          Requirements

                          EHDSObservation.code

                          Alternate NamesName
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          98. Observation.subject
                          Definition

                          The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

                          ShortWho and/or what the observation is about
                          Comments

                          One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

                          Control1..1
                          TypeReference(Patient (MyHealth@EU Core))
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          EHDSObservation.header.subject

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          100. Observation.focus
                          Definition

                          The actual focus of an observation when it is not the patient of record representing something or someone associated with the patient such as a spouse, parent, fetus, or donor. For example, fetus observations in a mother's record. The focus of an observation could also be an existing condition, an intervention, the subject's diet, another observation of the subject, or a body structure such as tumor or implanted device. An example use case would be using the Observation resource to capture whether the mother is trained to change her child's tracheostomy tube. In this example, the child is the patient of record and the mother is the focus.

                          ShortWhat the observation is about, when it is not about the subject of record
                          Comments

                          Typically, an observation is made about the subject - a patient, or group of patients, location, or device - and the distinction between the subject and what is directly measured for an observation is specified in the observation code itself ( e.g., "Blood Glucose") and does not need to be represented separately using this element. Use specimen if a reference to a specimen is required. If a code is required instead of a resource use either bodysite for bodysites or the standard extension focusCode.

                          Control0..*
                          TypeReference(Patient (MyHealth@EU Core), RelatedPerson: Animal specimen source, Location (MyHealth@EU Core), Substance, BiologicallyDerivedProduct)
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          EHDSObservation.directSubject[x]

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          102. Observation.encounter
                          Definition

                          The healthcare event (e.g. a patient and healthcare provider interaction) during which this observation is made.

                          ShortHealthcare event during which this observation is made
                          Comments

                          This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

                          Control0..1
                          TypeReference(Encounter)
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          For some observations it may be important to know the link between an observation and a particular encounter.

                          Alternate NamesContext
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          104. Observation.effective[x]
                          Definition

                          The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

                          ShortClinically relevant time/time-period for observation
                          Comments

                          At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

                          Control1..1
                          TypeChoice of: dateTime, Period
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Obligations
                            ObligationsActor
                            SHALL:handleMyHealth@EU Handler
                            Summarytrue
                            Requirements

                            EHDSObservation.observationDate[x]

                            Alternate NamesOccurrence
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            106. Observation.issued
                            Definition

                            The date and time this version of the observation was made available to providers, typically after the results have been reviewed and verified.

                            ShortDate/Time this version was made available
                            Comments

                            For Observations that don’t require review and verification, it may be the same as the lastUpdated time of the resource itself. For Observations that do require review and verification for certain updates, it might not be the same as the lastUpdated time of the resource itself due to a non-clinically significant update that doesn’t require the new version to be reviewed and verified again.

                            Control0..1
                            Typeinstant
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            EHDSObservation.header.authorship.datetime

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            108. Observation.performer
                            Definition

                            Who was responsible for asserting the observed value as "true".

                            ShortWho is responsible for the observation
                            Control1..*
                            TypeReference(Practitioner (MyHealth@EU Core), PractitionerRole (MyHealth@EU Core), Organization (MyHealth@EU Core))
                            Is Modifierfalse
                            Obligations
                              ObligationsActor
                              SHOULD:handleMyHealth@EU Handler
                              Summarytrue
                              Requirements

                              EHDSObservation.header.performer

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              110. Observation.performer.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              112. Observation.performer.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Observation.performer.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              114. Observation.performer.extension:performerFunction
                              Slice NameperformerFunction
                              Definition

                              Distinguishes the type of involvement of the performer in the event. For example, 'author', 'verifier' or 'responsible party'.

                              ShortType of performance
                              Comments

                              If a Practitioner(Role) is involved in multiple roles, the Practitioner(Role) has to be added multiple times.

                              Control0..1
                              TypeExtension(Performer function) (Extension Type: CodeableConcept)
                              Is Modifierfalse
                              Summaryfalse
                              Requirements

                              EHDSObservation.performer.function

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              116. Observation.performer.reference
                              Definition

                              A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                              ShortLiteral reference, Relative, internal or absolute URL
                              Comments

                              Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                              Control0..1
                              This element is affected by the following invariants: ref-1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              118. Observation.performer.type
                              Definition

                              The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                              The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                              ShortType the reference refers to (e.g. "Patient")
                              Comments

                              This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                              Control0..1
                              BindingUnless not suitable, these codes SHALL be taken from ResourceType
                              (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                              Aa resource (or, for logical models, the URI of the logical model).

                              Typeuri
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              120. Observation.performer.identifier
                              Definition

                              An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                              ShortLogical reference, when literal reference is not known
                              Comments

                              When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                              When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                              Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                              Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                              NoteThis is a business identifier, not a resource identifier (see discussion)
                              Control0..1
                              TypeIdentifier
                              Is Modifierfalse
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              122. Observation.performer.display
                              Definition

                              Plain text narrative that identifies the resource in addition to the resource reference.

                              ShortText alternative for the resource
                              Comments

                              This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              124. Observation.value[x]
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              EHDSObservation.result.value[x]

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              SlicingThis element introduces a set of slices on Observation.value[x]. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
                              • type @ $this
                              126. Observation.value[x]:valueQuantity
                              Slice NamevalueQuantity
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              TypeQuantity(Quantity (MyHealth@EU Core))
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              128. Observation.value[x]:valueQuantity.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              130. Observation.value[x]:valueQuantity.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Observation.value[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              132. Observation.value[x]:valueQuantity.extension:uncertainty
                              Slice Nameuncertainty
                              Definition

                              The primary measure of variance/uncertainty of the value (the square root of the sum of the squares of the differences between all data points and the mean).

                              ShortStandard Deviation (same units as the quantity)
                              Comments

                              standardDeviation has the same units as the quantity. It is used to normalize the data for computing the distribution function. Applications that cannot deal with probability distributions can still get an idea about the confidence level by looking at standardDeviation.

                              Control0..1
                              TypeExtension(Uncertainty) (Extension Type: decimal)
                              Is Modifierfalse
                              Summaryfalse
                              Requirements

                              EHDSObservation.result.uncertainty

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              134. Observation.value[x]:valueQuantity.value
                              Definition

                              The value of the measured amount. The value includes an implicit precision in the presentation of the value.

                              ShortNumerical value (with implicit precision)
                              Comments

                              The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

                              Control0..1
                              Typedecimal
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Precision is handled implicitly in almost all cases of measurement.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              136. Observation.value[x]:valueQuantity.comparator
                              Definition

                              How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

                              Short< | <= | >= | > - how to understand the value
                              Control0..1
                              BindingThe codes SHALL be taken from QuantityComparator
                              (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

                              How the Quantity should be understood and represented.

                              Typecode
                              Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

                              Meaning if MissingIf there is no comparator, then there is no modification of the value
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              138. Observation.value[x]:valueQuantity.unit
                              Definition

                              A human-readable form of the unit.

                              ShortUnit representation
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              140. Observation.value[x]:valueQuantity.system
                              Definition

                              The identification of the system that provides the coded form of the unit.

                              ShortSystem that defines coded unit form
                              Control0..1
                              This element is affected by the following invariants: qty-3
                              Typeuri
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need to know the system that defines the coded form of the unit.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              142. Observation.value[x]:valueQuantity.code
                              Definition

                              A computer processable form of the unit in some unit representation system.

                              ShortCoded form of the unit
                              Comments

                              The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

                              Control0..1
                              Typecode
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              144. Observation.value[x]:valueCodeableConcept
                              Slice NamevalueCodeableConcept
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              BindingThe codes SHALL be taken from eHDSI Results Coded Value Laboratory With Exceptions
                              (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIResultsCodedValueLaboratory)
                              TypeCodeableConcept
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              146. Observation.value[x]:valueRatio
                              Slice NamevalueRatio
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              TypeRatio(Ratio (MyHealth@EU Core))
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              148. Observation.value[x]:valueString
                              Slice NamevalueString
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              Typestring
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              150. Observation.value[x]:valueBoolean
                              Slice NamevalueBoolean
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              Typeboolean
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              152. Observation.value[x]:valueInteger
                              Slice NamevalueInteger
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              Typeinteger
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              154. Observation.value[x]:valueRange
                              Slice NamevalueRange
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              TypeRange(Range (MyHealth@EU Core))
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              156. Observation.value[x]:valueSampledData
                              Slice NamevalueSampledData
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              TypeSampledData
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              158. Observation.value[x]:valueTime
                              Slice NamevalueTime
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              Typetime
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              160. Observation.value[x]:valueDateTime
                              Slice NamevalueDateTime
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              TypedateTime
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              162. Observation.value[x]:valuePeriod
                              Slice NamevaluePeriod
                              Definition

                              The information determined as a result of making the observation, if the information has a simple value.

                              ShortLaboratory result value
                              Comments

                              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                              Control0..1
                              This element is affected by the following invariants: obs-7
                              TypePeriod
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              164. Observation.dataAbsentReason
                              Definition

                              Provides a reason why the expected value in the element Observation.value[x] is missing.

                              ShortWhy the result is missing
                              Comments

                              Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory".

                              The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

                              Control0..1
                              This element is affected by the following invariants: obs-6
                              BindingUnless not suitable, these codes SHALL be taken from eHDSI Data Absent Reason
                              (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSIDataAbsentReason)
                              TypeCodeableConcept
                              Is Modifierfalse
                              Summaryfalse
                              Requirements

                              EHDSObservation.dataAbsentReason

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              166. Observation.interpretation
                              Definition

                              A categorical assessment of an observation value. For example, high, low, normal.

                              ShortHigh, low, normal, etc.
                              Comments

                              Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                              Control0..*
                              BindingThe codes SHALL be taken from eHDSI Observation Interpretation With Exceptions
                              (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIObservationInterpretationWithExceptions)
                              TypeCodeableConcept
                              Is Modifierfalse
                              Summaryfalse
                              Requirements

                              EHDSObservation.interpretation

                              Alternate NamesAbnormal Flag
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              168. Observation.note
                              Definition

                              Comments about the observation or the results.

                              ShortComments about the observation
                              Comments

                              May include general statements about the observation, or statements about significant, unexpected or unreliable results values, or information about its source when relevant to its interpretation.

                              Control0..*
                              TypeAnnotation
                              Is Modifierfalse
                              Summaryfalse
                              Requirements

                              EHDSObservation.resultDescription

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              170. Observation.bodySite
                              Definition

                              Indicates the site on the subject's body where the observation was made (i.e. the target site).

                              ShortObserved body part
                              Comments

                              Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component.

                              If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite.

                              Control0..1
                              BindingThe codes SHALL be taken from eHDSI Body Site With Exceptions
                              (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIBodySiteWithExceptions)
                              TypeCodeableConcept
                              Is Modifierfalse
                              Summaryfalse
                              Requirements

                              EHDSObservation.anatomicLocation

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              172. Observation.bodySite.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              174. Observation.bodySite.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Observation.bodySite.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              176. Observation.bodySite.extension:bodySite
                              Slice NamebodySite
                              Definition

                              Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

                              ShortTarget anatomic location or structure
                              Control0..1
                              TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              178. Observation.bodySite.extension:bodySite.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              180. Observation.bodySite.extension:bodySite.extension
                              Definition

                              An Extension

                              ShortExtension
                              Control0..0
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Observation.bodySite.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              182. Observation.bodySite.extension:bodySite.url
                              Definition

                              Source of the definition for the extension code - a logical name or a URL.

                              Shortidentifies the meaning of the extension
                              Comments

                              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                              Control1..1
                              Typeuri
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              Fixed Value
                              {
                                "url" : "http://hl7.org/fhir/StructureDefinition/bodySite"
                              }
                              <url value="http://hl7.org/fhir/StructureDefinition/bodySite"/>
                              184. Observation.bodySite.extension:bodySite.value[x]
                              Definition

                              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                              ShortValue of extension
                              Control1..1
                              TypeReference(BodyStructure (MyHealth@EU Core))
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              186. Observation.bodySite.coding
                              Definition

                              A reference to a code defined by a terminology system.

                              ShortCode defined by a terminology system
                              Comments

                              Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                              Control0..*
                              TypeCoding
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Allows for alternative encodings within a code system, and translations to other code systems.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              188. Observation.bodySite.text
                              Definition

                              A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                              ShortPlain text representation of the concept
                              Comments

                              Very often the text is the same as a displayName of one of the codings.

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              190. Observation.method
                              Definition

                              Indicates the mechanism used to perform the observation.

                              ShortHow it was done
                              Comments

                              Only used if not implicit in code for Observation.code.

                              Control0..1
                              BindingThe codes SHALL be taken from eHDSI Laboratory Technique With Exceptions
                              (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSILabTechniqueWithExceptions)
                              TypeCodeableConcept
                              Is Modifierfalse
                              Summaryfalse
                              Requirements

                              EHDSObservation.method

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              192. Observation.specimen
                              Definition

                              The specimen that was used when this observation was made.

                              ShortSpecimen used for the observation
                              Comments

                              Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

                              Control0..1
                              TypeReference(Specimen: Laboratory)
                              Is Modifierfalse
                              Obligations
                                ObligationsActor
                                SHOULD:handleMyHealth@EU Handler
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                194. Observation.device
                                Definition

                                The device used to generate the observation data.

                                Short(Measurement) Device
                                Comments

                                Note that this is not meant to represent a device involved in the transmission of the result, e.g., a gateway. Such devices may be documented using the Provenance resource where relevant.

                                Control0..1
                                TypeReference(Device: Measuring)
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Device information for laboratory observations

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                196. Observation.referenceRange
                                Definition

                                Guidance on how to interpret the value by comparison to a normal or recommended range. Multiple reference ranges are interpreted as an "OR". In other words, to represent two distinct target populations, two referenceRange elements would be used.

                                ShortProvides guide for interpretation
                                Comments

                                Reference-range bounds are inclusive when no comparator is present. Use lowComparator or highComparator to state the comparator for an exclusive or explicitly inclusive bound. These modifier extensions pre-adopt the comparator on the reference-range bounds introduced in FHIR R6.

                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                EHDSObservation.referenceRange

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                obs-3: Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())
                                198. Observation.referenceRange.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                200. Observation.referenceRange.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                202. Observation.referenceRange.modifierExtension
                                Definition

                                An Extension

                                ShortExtension
                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Observation.referenceRange.modifierExtension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                204. Observation.referenceRange.modifierExtension:lowComparator
                                Slice NamelowComparator
                                Definition

                                The comparator for Observation.referenceRange.low. This modifier extension pre-adopts the R6 comparator on the low reference-range bound.

                                ShortObservation Reference Range Low Comparator
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                TypeExtension(Observation Reference Range Low Comparator) (Extension Type: code)
                                Is Modifiertrue because Changes the interpretation of Observation.referenceRange.low by stating whether the bound is inclusive or exclusive.
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                206. Observation.referenceRange.modifierExtension:highComparator
                                Slice NamehighComparator
                                Definition

                                The comparator for Observation.referenceRange.high. This modifier extension pre-adopts the R6 comparator on the high reference-range bound.

                                ShortObservation Reference Range High Comparator
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                TypeExtension(Observation Reference Range High Comparator) (Extension Type: code)
                                Is Modifiertrue because Changes the interpretation of Observation.referenceRange.high by stating whether the bound is inclusive or exclusive.
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                208. Observation.referenceRange.low
                                Definition

                                The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3).

                                ShortLow Range, if relevant
                                Control0..1
                                This element is affected by the following invariants: obs-3
                                TypeQuantity(SimpleQuantity)
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
                                210. Observation.referenceRange.high
                                Definition

                                The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3).

                                ShortHigh Range, if relevant
                                Control0..1
                                This element is affected by the following invariants: obs-3
                                TypeQuantity(SimpleQuantity)
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
                                212. Observation.referenceRange.type
                                Definition

                                Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.

                                ShortReference range qualifier
                                Comments

                                This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.

                                Control0..1
                                BindingThe codes SHALL be taken from eHDSI Reference Range Meaning With Exceptions
                                (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIReferenceRangeMeaningWithExceptions)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                214. Observation.referenceRange.appliesTo
                                Definition

                                Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an "AND" of the target populations. For example, to represent a target population of African American females, both a code of female and a code for African American would be used.

                                ShortReference range population
                                Comments

                                This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.

                                Control0..*
                                BindingThe codes SHALL be taken from eHDSI Reference Range Applies To With Exceptions
                                (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIReferenceRangeAppliesToWithExceptions)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Need to be able to identify the target population for proper interpretation.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                216. Observation.referenceRange.age
                                Definition

                                The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so.

                                ShortApplicable age range, if relevant
                                Control0..1
                                TypeRange
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Some analytes vary greatly over age.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                218. Observation.referenceRange.text
                                Definition

                                Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of "Negative" or a list or table of "normals".

                                ShortText based reference range in an observation
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                220. Observation.hasMember
                                Definition

                                This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.

                                ShortRelated resource that belongs to the Observation group
                                Comments

                                When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.

                                Control0..*
                                TypeReference(ObservationResults: Laboratory)
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                EHDSObservation.hasMember[x]

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                222. Observation.derivedFrom
                                Definition

                                The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.

                                ShortRelated measurements the observation is made from
                                Comments

                                All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see Notes below.

                                Control0..*
                                TypeReference(Observation: Medical Test Result (MyHealth@EU Core), ImagingStudy)
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                EHDSObservation.derivedFrom[x]

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                224. Observation.component
                                Definition

                                Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

                                ShortLaboratory result
                                Comments

                                For a discussion on the ways Observations can be assembled in groups together see Notes below.

                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                EHDSObservation.component

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                obs-value-2: The elements Observation.component.extension:value-r5 and Observation.component.value[x] SHALL not be used simultaneously. (value.empty() or extension('http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.component.value').empty())
                                226. Observation.component.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                228. Observation.component.extension
                                Definition

                                An Extension

                                ShortExtension
                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Observation.component.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                230. Observation.component.extension:value-r5
                                Slice Namevalue-r5
                                Definition

                                When the result is a Diagram or Picture (Microbiology), then the Attachment data type should be used. In FHIR R4 this can be done by preadopting the R5 Observation.component.value[x] element using the cross-version extension.

                                Shortonly for Diagrams or Pictures
                                Comments

                                Element Observation.component.value[x] is mapped to FHIR R4 element Observation.component.value[x] as SourceIsBroaderThanTarget. The mappings for Observation.component.value[x] do not cover the following types: Attachment, Reference. The target context Observation.component.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Observation.component. Used when observation has a set of component observations:

                                • An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived).
                                • If a value is present, the datatype for this element should be determined by the code.
                                • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
                                • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
                                • If a value is present, the datatype for this element should be determined by the code.
                                • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
                                • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
                                • The usage of valueReference is restricted to the MolecularSequence resource when used as a definitional resource, not as a patient-specific finding. .
                                • For additional guidance, see the Notes section below.
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                TypeExtension(R5: value additional types) (Extension Type: Choice of: Attachment, Reference(Cross-version Profile for R5.MolecularSequence for use in FHIR R4, MolecularSequence))
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                232. Observation.component.extension:value-r5.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                234. Observation.component.extension:value-r5.extension
                                Definition

                                An Extension

                                ShortExtension
                                Control0..0
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Observation.component.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                236. Observation.component.extension:value-r5.url
                                Definition

                                Source of the definition for the extension code - a logical name or a URL.

                                Shortidentifies the meaning of the extension
                                Comments

                                The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                                Control1..1
                                Typeuri
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                Fixed Value
                                {
                                  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.component.value"
                                }
                                <url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.component.value"/>
                                238. Observation.component.extension:value-r5.value[x]
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortActual component result
                                Comments

                                Used when observation has a set of component observations:

                                • An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived).
                                • If a value is present, the datatype for this element should be determined by the code.
                                • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
                                • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
                                • If a value is present, the datatype for this element should be determined by the code.
                                • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
                                • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
                                • The usage of valueReference is restricted to the MolecularSequence resource when used as a definitional resource, not as a patient-specific finding. .
                                • For additional guidance, see the Notes section below.
                                Control0..1
                                TypeAttachment
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                240. Observation.component.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                242. Observation.component.code
                                Definition

                                Describes what was observed. Sometimes this is called the observation "code".

                                ShortType of component observation (code / type)
                                Comments

                                All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                                Control1..1
                                BindingThe codes SHALL be taken from eHDSI Laboratory Codes With Exceptions
                                (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSILabCodeWithExceptions)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                EHDSObservation.component.code

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                244. Observation.component.value[x]
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                EHDSObservation.component.result.value[x]

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                SlicingThis element introduces a set of slices on Observation.component.value[x]. The slices are Unordered and Closed, and can be differentiated using the following discriminators:
                                • type @ $this
                                246. Observation.component.value[x]:valueQuantity
                                Slice NamevalueQuantity
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                TypeQuantity(Quantity (MyHealth@EU Core))
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                248. Observation.component.value[x]:valueQuantity.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                250. Observation.component.value[x]:valueQuantity.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Observation.component.value[x].extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                252. Observation.component.value[x]:valueQuantity.extension:uncertainty
                                Slice Nameuncertainty
                                Definition

                                The primary measure of variance/uncertainty of the value (the square root of the sum of the squares of the differences between all data points and the mean).

                                ShortStandard Deviation (same units as the quantity)
                                Comments

                                standardDeviation has the same units as the quantity. It is used to normalize the data for computing the distribution function. Applications that cannot deal with probability distributions can still get an idea about the confidence level by looking at standardDeviation.

                                Control0..1
                                TypeExtension(Uncertainty) (Extension Type: decimal)
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                EHDSObservation.component.result.uncertainty

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                254. Observation.component.value[x]:valueQuantity.value
                                Definition

                                The value of the measured amount. The value includes an implicit precision in the presentation of the value.

                                ShortNumerical value (with implicit precision)
                                Comments

                                The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

                                Control0..1
                                Typedecimal
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Precision is handled implicitly in almost all cases of measurement.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                256. Observation.component.value[x]:valueQuantity.comparator
                                Definition

                                How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value.

                                Short< | <= | >= | > - how to understand the value
                                Control0..1
                                BindingThe codes SHALL be taken from QuantityComparator
                                (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

                                How the Quantity should be understood and represented.

                                Typecode
                                Is Modifiertrue because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

                                Meaning if MissingIf there is no comparator, then there is no modification of the value
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                258. Observation.component.value[x]:valueQuantity.unit
                                Definition

                                A human-readable form of the unit.

                                ShortUnit representation
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                260. Observation.component.value[x]:valueQuantity.system
                                Definition

                                The identification of the system that provides the coded form of the unit.

                                ShortSystem that defines coded unit form
                                Control0..1
                                This element is affected by the following invariants: qty-3
                                Typeuri
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Need to know the system that defines the coded form of the unit.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                262. Observation.component.value[x]:valueQuantity.code
                                Definition

                                A computer processable form of the unit in some unit representation system.

                                ShortCoded form of the unit
                                Comments

                                The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

                                Control0..1
                                Typecode
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                264. Observation.component.value[x]:valueCodeableConcept
                                Slice NamevalueCodeableConcept
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                BindingThe codes SHALL be taken from eHDSI Results Coded Value Laboratory With Exceptions
                                (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIResultsCodedValueLaboratory)
                                TypeCodeableConcept
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                266. Observation.component.value[x]:valueRatio
                                Slice NamevalueRatio
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                TypeRatio(Ratio (MyHealth@EU Core))
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                268. Observation.component.value[x]:valueString
                                Slice NamevalueString
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                Typestring
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                270. Observation.component.value[x]:valueBoolean
                                Slice NamevalueBoolean
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                Typeboolean
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                272. Observation.component.value[x]:valueInteger
                                Slice NamevalueInteger
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                Typeinteger
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                274. Observation.component.value[x]:valueRange
                                Slice NamevalueRange
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                TypeRange(Range (MyHealth@EU Core))
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                276. Observation.component.value[x]:valueSampledData
                                Slice NamevalueSampledData
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                TypeSampledData
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                278. Observation.component.value[x]:valueTime
                                Slice NamevalueTime
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                Typetime
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                280. Observation.component.value[x]:valueDateTime
                                Slice NamevalueDateTime
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                TypedateTime
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                282. Observation.component.value[x]:valuePeriod
                                Slice NamevaluePeriod
                                Definition

                                The information determined as a result of making the observation, if the information has a simple value.

                                ShortLaboratory component result value
                                Comments

                                Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                                Control0..1
                                TypePeriod
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                284. Observation.component.dataAbsentReason
                                Definition

                                Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                                ShortWhy the component result is missing
                                Comments

                                "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                                The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                                Control0..1
                                This element is affected by the following invariants: obs-6
                                BindingUnless not suitable, these codes SHALL be taken from eHDSI Data Absent Reason
                                (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSIDataAbsentReason)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                EHDSObservation.component.dataAbsentReason

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                286. Observation.component.interpretation
                                Definition

                                A categorical assessment of an observation value. For example, high, low, normal.

                                ShortHigh, low, normal, etc.
                                Comments

                                Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                                Control0..*
                                BindingThe codes SHALL be taken from eHDSI Observation Interpretation With Exceptions
                                (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIObservationInterpretationWithExceptions)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                EHDSObservation.component.interpretation

                                Alternate NamesAbnormal Flag
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                288. Observation.component.referenceRange
                                Definition

                                Guidance on how to interpret the value by comparison to a normal or recommended range.

                                ShortProvides guide for interpretation of component result
                                Comments

                                Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                                Control0..*
                                TypeSeettp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                EHDSObservation.component.referenceRange

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))